If you're having issues with your commercial water heater, you want to make sure you're keeping it in pristine condition. These maintenance tips will help.

Maintenance Tips for a Commercial Water Heater

A broken commercial water heater could leave your business out in the cold. Literally, and yet many companies neglect their water heaters until they break.

Waiting until your water heater breaks down to think about maintaining it is not just bad for the environment; it is bad for your bottom line.

Want to make sure that you never suffer a hot water heater outage? Great. Let’s look at how you can ensure that your water heater keeps going strong for as long as you own your business.


Checking and Replacing the Anode Rod

Checking and replacing the anode rod is essential for the regular maintenance of a commercial water heater. The anode rod helps protect the heater from corrosion and rusting. The rod should be inspected every six months and replaced when needed.

To check the anode rod, the tank must be drained, and the anode rod must be removed and inspected for rust or damage. If the rod needs replacement, put on safety gloves and an eye guard, and replace the anode rod by using a suitable wrench.

Ensure the new anode rod is flush with the tank, and hand-tighten the hex nut. After replacing the anode rod, re-fill the tank with clean and cold water and test the heater unit.

Knowing When to Drain and Flush the Tank

There are a few signs that it may be time for a flush and drain. First, if you start to experience a decrease in hot water pressure, this can indicate a need for a flush and drain.

Second, if you can see signs of sediment (hard water deposits) building up in the tank, it may be time to flush out the tank. Finally, if the tank has not been flushed and drained in the last year, it is recommended to do so to maintain the heater’s efficiency.

Remember to take safety precautions when draining and flushing your commercial water heater tank. For professional assistance, check this reliable water heater repair and installation service.

Maintaining a Healthy Burner and Pilot Assembly

The burner and pilot assembly can be inspected periodically to ensure that it is in proper working condition. First, check the fuel lines, burners, and valves for blockages and leaks. Once those have been checked, look for any buildup or corrosion in the pilot assembly box.

Make sure to regularly clean the pilot assembly housing with approved solvents to prevent buildup with metal debris. Lastly, ensuring that all connections throughout the system are tight and secured is essential when fixing a water heater.

Inspecting and Changing Gaskets and DIP Tubes

It is essential to regularly inspect and change out gaskets and DIP tubes on a business water heater. Such maintenance helps ensure that the water heater runs efficiently.

Yearly inspections of the gasket should be carried out to ensure a proper seal. The DIP tube should also be checked for calcification or cracks regularly. If a crack is located, then the DIP tube should be replaced.

Both maintenance tasks require turning off the power and water to the heater and draining the tank. During the inspection, debris, and scale can be wiped from the pipes and tank.

Avoid Commercial Water Heater Problems by Being Proactive

With proper and regular maintenance, your commercial water heater can last many years. Be sure to consult a professional for any major repairs or when instruction manuals are unavailable. Get in touch with a local plumber for more detailed maintenance tips for your commercial water heater.

Did you enjoy this article? Visit our blog today to learn more!

Related Posts